2008 Mercedes-Benz E550
Mileage
187,209
Service Date
4/25/2020
Services Performed
- Change the engine oil, filter and lubricate the chassis as needed. Check all fluid levels Inspect the air filter, accessory fan belts, cooling system hoses, and condition of the coolant. Check the status of tires and set tire pressures. Check the operation of all exterior lights. Advise of any needed or recommended repairs. Reset service reminder indicator.
- Cleans fuel injectors Cleans throttle body Cleans plenum and air intake Cleans intake valves and ports Removes combustion chamber deposits Corrects balance of fuel and air in system
- Front Lower control arms. (bushing broken) Adjust front wheel bearings. Two front tires (inner wear) Bridgestone Potenza RE 970as 245/40/18 4 wheel Alignment
- INDICATOR SERVICE 07 – PERFORM – [Perform Indicator Service 7 at every 91000 miles or 60 months.] INDICATOR SERVICE 12 – PERFORM – [Perform Indicator Service 12 at every 13000 miles or 12 months.] INDICATOR SERVICE 13 – PERFORM – [Perform Indicator Service 13 at 13000 miles or 12 months; then every 26000 miles or 24 months.] US Service 7 – Every 91,000 Miles or 5 Years, Replace spark plugs. With Adaptive Brake Replace brake fluid US Service 12 – Every 13,000 Miles or 1 Year, Engine – oil and filter change US Service 13 – At 13,000 Miles or 1 Year, Then Every 26,000 Miles or 2 Years Required Tire Rotation, Replace engine air-cleaner insert Every 26,000 Miles or 2 Years, Add Replace combination filter – dust filter
- Mount and Balance Tire: Two front tires Bridgestone POTENZA RE980AS 2454018
- Oil filter stand gasket leaking oil
- Pcv valve cover Rear cam plugs Leaking oil
- Perform an initial road test. Inspect the brake hydraulic system for leaks. Flush the brake hydraulic system. Fill to the proper level with fresh brake fluid. Perform the final road test. **due every 2 years**
- Replace air and cabin filter
- Replace spark Plugs
- Replaced collapsed transmission mount
- Road test the vehicle. Install the alignment equipment and check the caster, camber, and toe settings. Advise of any needed adjustments to the caster, camber. If caster and camber are within manufacturer specifications, set toe, otherwise prepare an estimate to install correct adjustment devices. Remove the alignment equipment and perform a final road test on the vehicle.
Stan V. gave our service a 5 star review on 4/25/2020
