Customer States he was told the harness to the DEM had oil in it. The vehicle does need rear brakes. Motor mounts completed. Customer wants to know how bad oil is and if the vehicle is worth fixing.
Install and clean connectors and harness.
If done in conjunction with the cam position sensors
ENGINE OR TRANSMISSION MOUNT – Remove & Replace – Base All
AIR CLEANER ELEMENT – Remove & Replace – 4Matic,Base Both
Thomas P. gave our service a 5 star review on 8/6/2025
Customer States there is an air bag message. The message did go away this morning. The auto stop start message is displayed and will not go away. The auxiliary battery has been replaced recently.
Gary A. gave our service a 5 star review on 8/6/2025
Customer States: Drivetrain malfunction light was on -may not have full power After three and a half hour drive -the vehicle lost all power Let the car sit for 10-15 minutes then it started back up -all the warnings were gone
FUEL PUMP – Remove & Replace – In Tank
Replace the fuel pump control module Code to the vehicle
Change the engine oil, filter and lubricate the chassis as needed. Check all fluid levels Inspect the air filter, accessory fan belts, cooling system hoses, and condition of the coolant. Check the status of tires and set tire pressures. Check the operation of all exterior lights. Advise of any needed or recommended repairs. Reset service reminder indicator.
Replace rear brake pad set Replace rear brake pad sensors Replace rear brake disc Release Electric Brake
Ed F. gave our service a 5 star review on 7/19/2025
Change the engine oil, filter and lubricate the chassis as needed. Check all fluid levels Inspect the air filter, accessory fan belts, cooling system hoses, and condition of the coolant. Check the status of tires and set tire pressures. Check the operation of all exterior lights. Advise of any needed or recommended repairs. Reset service reminder indicator.
Mount and Balance Tire: 225/55/17
Road test the vehicle. Install the alignment equipment and check the caster, camber, and toe settings. Advise of any needed adjustments to the caster, camber. If caster and camber are within manufacturer specifications, set toe, otherwise prepare an estimate to install correct adjustment devices. Remove the alignment equipment and perform a final road test on the vehicle.
STABILIZER BAR CONTROL LINK – Remove & Replace – Both front and rear.
Hemant K. gave our service a 5 star review on 7/17/2025
Replace both leaking covers Replaced damaged engine mount
Perform a visual inspection for leaks. Install pressure gauges. Check high and low pressures and outlet duct temperature. Scan applicable computer systems. Check cooling fan operation. Evacuate and recycle Freon. Recharge with new freon to manufacturers specifications. Install UV leak detecion dye as required. Check for leaks w/UV dye. Check for proper air conditioning operation. **Needed Freon is additional** Freon Recovered:_____________KG Freon Capacity: _____________KG High side pressure:____________PSI Low side pressure:____________PSI Leak Detected: Pass Fail Duct temperature:_____________F **Needed Freon is additional**
Amelia J. gave our service a 5 star review on 7/16/2025