STEERING GEAR – Remove & Replace – [DOES NOT include alignment.]
Code steering gear to vehicle
Road test the vehicle. Install the alignment equipment and check the caster, camber, and toe settings. Advise of any needed adjustments to the caster, camber. If caster and camber are within manufacturer specifications, set toe, otherwise prepare an estimate to install correct adjustment devices. Remove the alignment equipment and perform a final road test on the vehicle.
David W. gave our service a 5 star review on 9/8/2025
Change the engine oil, filter and lubricate the chassis as needed. Check all fluid levels Inspect the air filter, accessory fan belts, cooling system hoses, and condition of the coolant. Check the status of tires and set tire pressures. Check the operation of all exterior lights. Advise of any needed or recommended repairs. Reset service reminder indicator.
WHEELS (ALL) – Rotate – [Includes: Adjust Tire air pressure and torque Wheels to factory specifications.]
Julie & Allen O. gave our service a 5 star review on 9/8/2025
Perform a visual inspection for leaks. Install pressure gauges. Check high and low pressures and outlet duct temperature. Scan applicable computer systems. Check cooling fan operation. Evacuate and recycle Freon. Recharge with new freon to manufacturers specifications. Install UV leak detecion dye as required. Check for leaks w/UV dye. Check for proper air conditioning operation. **Needed Freon is additional** Freon Recovered:_______.128______KG Freon Capacity: _______.525______KG High side pressure:___165_________PSI Low side pressure:_____42_______PSI Leak Detected: (Pass) Fail Duct Temperature:_____42________F **Needed Freon is additional**
Flush the vehicle coolant system Fill system to manufacturer specifications
Perform an initial road test. Inspect the brake hydraulic system for leaks. Flush the brake hydraulic system. Fill to the proper level with fresh brake fluid. Perform the final road test. **due every 2 years**
Max K. gave our service a 5 star review on 6/16/2025
Perform an initial road test. Inspect the brake hydraulic system for leaks. Flush the brake hydraulic system. Fill to the proper level with fresh brake fluid. Perform the final road test. **due every 2 years**
Customer States: The engine light is on -P2015 fault code stored
Inspect for carbon build up
Davd C. gave our service a 5 star review on 6/14/2025
The vehicle has a large oil leak -had the oil service done last week
Remove the oil drain plug Catch engine oil Replace the oil drain plug and gasket Reuse engine oil Add oil to the Audi specifications Clean up the oil leak and the belly pan
Karen B. gave our service a 5 star review on 6/3/2025